Pivot Point Calculator
Compute pivot point levels across five methods (Floor, Woodie, Camarilla, DeMark and Fibonacci) in one click. Auto-pulls live OHLC from the previous closed bar, calculates the central pivot (PP) plus resistance (R1–R4) and support (S1–S4) levels, and tells you which prices the market will treat as the day’s structural breakers.
Five pivot methods: Floor, Camarilla, Woodie, DeMark, Fibonacci
Pick a symbol (forex, crypto, stocks, commodities, indices), choose your timeframe (daily is standard for day traders, weekly/monthly for swing), and the tool auto-fetches the most recent closed bar’s High / Low / Close (and Open for DeMark). Hit Calculate and the six panels below appear. Five method cards (Floor, Woodie, Camarilla, DeMark, Fibonacci), multi-timeframe view, cross-timeframe confluence, current-price proximity, save scenarios, and AI trade setups.
1. Five pivot methods, one click : Floor, Woodie, Camarilla, DeMark, Fibonacci
Five method cards stack vertically with all levels computed in a single calculation. Floor pivots are the classic day-trader standard (PP, R1–R3, S1–S3) and the most-watched levels on every chart. Woodie weights the close more heavily. Useful when you trust the latest price action over the range. Camarilla (R1–R4, S1–S4) is the high-fidelity scalping method. Tight levels with R3/S3 marking the day’s likely reversal points. DeMark shifts the pivot based on whether the bar closed above or below its open. Fibonacci applies the golden-ratio percentages to the range above and below the central pivot. Each card surfaces the formula hint and the distance from current price in pips/points.
Floor Pivot Method
1.28333
+316 pips
1.27167
+200 pips
1.26333
+117 pips
1.25167
pivot
1.24333
−83 pips
1.23167
−200 pips
1.22333
−284 pips
2. Multi-timeframe pivots : Daily, Weekly & Monthly side-by-side
One pivot card is useful; three timeframes overlaid is decisive. Pro shows you the Daily, Weekly, and Monthly Floor pivots side-by-side, so you can see when today’s R1 is the same price as this week’s PP (high-confluence resistance) or when today’s S2 sits on this month’s S1 (catastrophic support break risk). CleaRank Pro unlocks the multi-timeframe view; free users compute one timeframe at a time.
3. Price proximity : where the market sits right now
Below the level cards, the calculator surfaces a one-line narrative describing where the current live price sits relative to the pivots. E.g. “Price 1.2575 is 8 pips above PP and 58 pips below R1. Trending bullish but not yet at resistance.” That sentence is the trade context in plain English. A 4-tile stat grid below shows distance to nearest resistance, distance to nearest support, range (PP–R1 vs PP–S1), and the day’s ATR for sanity-checking whether levels are reachable.
SAFE · 1.0%
1 lot · 1.0850
4. Camarilla vs Floor : which method for which trade?
Floor pivots are the day-trader default. Widely watched, levels spaced ~50 pips on EUR/USD, R3/S3 mark the day’s likely outer band. Camarilla pivots are tighter and more numerous (R1–R4, S1–S4). Perfect for scalpers wanting precision entries at R3/S3 (mean-revert) or breakout triggers at R4/S4. Woodie weights the close higher. Useful when the close is far from the mid of the range. DeMark shifts based on close vs open. Fibonacci applies 38.2% / 61.8% / 100% projections to the range. Run all five and look for confluence. That’s where the real reaction happens.
5. Cross-timeframe confluence : the strongest pivot zones
Pivot levels reverse 2–3× more reliably when multiple methods agree at the same price. Pro surfaces confluence zones. Price areas where Floor R1, Camarilla R3, and Weekly PP all sit within 5 pips of each other. Each zone gets a 1–5 star strength rating + the exact price band to watch for entry triggers. CleaRank Pro unlocks the confluence panel; free shows single-method levels only.
6. AI Pivot Trade Setups : entry, stop, and TP in plain English
CleaRank Financial AI reads your full pip setup. Pair, account currency, size, balance, stop distance, and live ATR, and returns a verdict (Bullish · Above PP / Over-Sized / Tight-Stop / Wide-Stop) with the reasoning written the way a desk head would talk it through. It flags whether your stop distance fits the pair’s typical 4H range, whether your dollar risk respects the 2% rule, and gives a pro tip on what to adjust. Particularly useful when the calculator says “$10/pip on 1 lot” and your inner gambler whispers “size up”. The AI tells you, in writing, what the math says about that idea before you click buy.
When each method shines: trending day, range day, breakout day
Day traders, gold swing traders, USD-base retail accounts, or prop-firm challengers measuring everything in $ risk per trade. The pip-to-dollar math is the same idea but the conversions differ. Pick the workflow that matches yours.
Day traders
USD/JPY and GBP/JPY use a 0.01 pip instead of 0.0001. Get this wrong and your dollar-per-pip is off by 100×. The calculator gets it right every time.
Scalpers
Use Weekly + Monthly pivots as macro structure. Weekly R1 caps most rallies in sideways markets; Monthly S1 catches the bottom of corrections in strong trends. Hold positions around these levels with conviction.
Swing traders
XAU/USD pips and oil ticks need their own contract-spec lookup. The calculator handles per-instrument pip conventions so $/pip is always accurate.
Algorithmic / systematic traders
Funded accounts measure everything in $ risk per trade. Converting pip distance to exact dollar risk on the first try is the difference between passing and busting the daily cap.
Multi-timeframe pivots: daily, weekly, monthly stacked on one chart
Most pivot tools online compute only Floor pivots and stop there. But the price action that actually triggers reactions is at confluence. Where Floor R1 lines up with Camarilla R3 and Weekly PP. This calculator runs all five methods (Floor, Woodie, Camarilla, DeMark, Fibonacci) in a single calculation, marks the most-watched levels, and shows you the math behind every number. Auto-Fill pulls the previous bar’s OHLC directly from the live tape so you never type the wrong close price. Free, no login, works on every asset class. Forex, gold, oil, crypto, stocks, indices.
It’s the same pivot engine that runs inside the CleaRank trading workbench used by paying customers. Exposed here for free, no signup. CleaRank Pro adds Multi-Timeframe Pivots (Daily + Weekly + Monthly side-by-side), Cross-Timeframe Confluence Zones, Historical Accuracy, and Save/Load Scenario across symbols. Ultra adds AI Pivot Trade Setups. A AI-grounded plain-English playbook: market posture, key levels, long + short trade scenarios, and session considerations.
Reading R1-R3 and S1-S3: where price actually reacts on a typical session
A pivot point (PP) is a horizontal price line computed from the previous bar’s High, Low, and Close. It represents the mathematical center of the prior price action. The price at which buyers and sellers were last in equilibrium. Above PP, the bias is bullish; below PP, bearish. From PP, resistance levels (R1, R2, R3, R4) project upward and support levels (S1, S2, S3, S4) project downward. The standard Floor formula is PP = (H + L + C) ÷ 3. Other methods adjust the weighting (Woodie, DeMark) or use different projections (Camarilla, Fibonacci). Floor pivots are the most-watched and therefore the most reliable. They create self-fulfilling reactions because every active day trader is looking at the same level.
“Pip value is the bridge between the chart and your account balance. Most traders pretend the bridge is solid, and most of them are wrong about how wide it is. The math takes 30 seconds; the surprise lasts a year.”
The pivot point formula, in plain English
Floor pivots (standard): PP = (H + L + C) ÷ 3. R1 = 2·PP − L. S1 = 2·PP − H. R2 = PP + (H − L). S2 = PP − (H − L). R3 = H + 2·(PP − L). S3 = L − 2·(H − PP). H, L, C are the High, Low, and Close of the previous closed bar (yesterday’s for daily pivots, last week’s for weekly).
Example: EUR/USD previous-day OHLC: High 1.2600, Low 1.2400, Close 1.2550. PP = (1.2600 + 1.2400 + 1.2550) ÷ 3 = 1.2517. R1 = 2×1.2517 − 1.2400 = 1.2633. S1 = 2×1.2517 − 1.2600 = 1.2433. The calculator above runs Floor + Woodie + Camarilla + DeMark + Fibonacci simultaneously in 50ms.
EUR/USD on USD account = $10/pip (no conversion). USD/JPY on USD account at 150 = $6.67/pip. Cross pairs need a triangular conversion.
Worked example : the five pivot methods on one bar
EUR/USD previous-day OHLC: H=1.2600, L=1.2400, C=1.2550, O=1.2450. Same range, four different methods. Notice how each produces different R1/S1 values, but all cluster around the same central pivot. Use multiple methods together to find the high-probability confluence zones.
Notice that Floor and Fibonacci share the same PP (1.2517) because both use the (H+L+C)/3 base, but their R1/S1 differ because Fibonacci uses 38.2% range projections while Floor uses 2×PP−L. Woodie’s PP shifts slightly (1.2525) because it double-weights the close. Camarilla’s levels are tighter because it’s designed for scalping. DeMark requires the Open price to choose a branch. Multi-method = multi-perspective on the same data.
Pivot methods : quick reference (formula, levels, best use)
The five pivot methods at a glance. Each row shows the central PP formula, how many resistance and support levels are projected, and the trading style each is best suited for. Run all five together to find confluence zones; pick a single method when you want a clean trading map.
All five methods produce levels in the instrument’s native price units. Pips for forex, points for indices, dollars for stocks/crypto/metals. Levels are static for the duration of the timeframe (a daily pivot doesn’t change intraday) until the next bar closes.
Five pivot-point mistakes this calculator stops you making
Every trader has made these. The expensive ones make them every week and only spot the bleed when the equity curve doesn’t match the journal.
Assuming $10 per pip everywhere
“$10 per pip” only holds for EUR/USD-style pairs on a USD account. USD/JPY is $6.67. EUR/GBP from a USD account is ~$13. Use the wrong pip value and your stop-loss is calibrated to the wrong dollar risk on every trade.
Forgetting JPY pip is 0.01, not 0.0001
USD/JPY moves from 150.00 to 150.01 = 1 pip, not 100 pips. Misread the decimal and your “10-pip stop” is actually 1,000 pips wide. Meaning the trade is essentially un-stoppable until margin runs out.
Ignoring the cross-rate on non-USD pairs
EUR/GBP, AUD/NZD, GBP/JPY. None of these has USD in them, so a USD account needs a triangular conversion to get the real $/pip. Eyeballing it is off by 5–15%. The calculator pulls the live cross every refresh.
Mixing up lots and units
Skipping the triangular cross-rate conversion. A USD/JPY profit on a EUR account requires JPY → USD → EUR. Two steps, not one. Manual math that does only the first step is 5-15% off on volatile days. The calculator handles the chain automatically.
Using pips for gold and oil
XAU/USD doesn’t have “pips” the same way EUR/USD does. Gold uses $0.01 per ounce per contract. Oil futures use $0.01 per barrel per contract. Treat them like forex pips and your risk math will be 10× off.
Continue the workflow with these calculators
Frequently asked questions
Size every trade with pip-perfect precision.
The calculator handles the pip math. CleaRank handles the workflow. Live ATR volatility, strategy profiles, AI pip intelligence and the rest of the 22-tool dashboard.
Pro
- Multi-Timeframe Pivots (Daily + Weekly + Monthly)
- Strategy Profiles, Save Scenario, PDF/CSV exports
- Exports, simulator + the rest of the workbench
Ultra
- Everything in Pro, plus ,
- AI Pivot Setups. Entry, stop, TP playbook
- AI Trade Coach + multi-account + Replay
Cancel anytime
All 22 tools included